SPA Oil Diffusers Smell Oil Diffuser
Operation Step1 Take out the outer cover Step2 Connect the unit with AC adapter(Noted: Do not plug the AC adapter to power supply at this moment.) Step3 Use the measuring cup to fill pure water inside water tank; Suggested to fill water level:300ml Step4 Drop a little bit essential oil or...
Step1 Take out the outer cover
Step2 Connect the unit with AC adapter(Noted: Do not plug the AC adapter to power supply at this moment.)
Step3 Use the measuring cup to fill pure water inside water tank; Suggested to fill water level:300ml
Step4 Drop a little bit essential oil or perfumes into the water,2 to 3 drops for 100ml water.(Noted: Please clean up the water tank after using for each time)
Step5 Reinstall the outer cover.(Do not open the outer cover during operation. Please switch off the product before filling water and/or putting essential oil.)
First press, the unit enters into continuous mist mode. (One indicator ON)
Second press, the unit enters into intermittent mist mode (work 20s, stop 10s, recycle). (Two indicators ON)
Third press, turn off the unit. (Long press can turn off the unit at any mode)
First press, turn on the light and there are 7 colors changing automatically.
Second press, pause on current color.
Third press, move to next color and brightness can be adjusted by press again.
Light can work alone when mist is off.
1.Connect with the power adapter
2.Put it on the flat place and lift the cover
3.Remove the tank lid
4.Pour into water by measure cup and add essential oil
5.Close the lid and cover
6.Connect the adpator with power
7.Press ON/OFF,it works
1. 7 colors lamps changing .
2. mode for mist adjustment:low and high
3. Mute: 20-25dB.
4. 0.3NM, Absorbable, No sweat.
5. Good agent to clean the air.
6. Promote blood circulation & metabolism.
7. Remove the dust & peculiar smell.
8. Auto power-off, if water ran out.
9. CE ,RoHS ,FCC,UL certificates.
1.The amount and intensity of mist produced will vary, but this is not unusual and should not be considered as a fault.
2. Factors that affect this include water type, humidity, temperature, air currents.
3.The unit will not work without water.
4.Use 2-5 drops per 100ML water a time. Too much oil will clog the system and cause malfunction. Please clean the unit as per the maintenance instructions, before changing to use a new type of essential oil.